###
DOI:
有色金属(矿山部分):2021,73(2):60-63
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
高阶段采场充填体强度影响因素敏感性分析
魏福海, 王忠强
((安徽马钢罗河矿业有限责任公司,合肥 231500))
Sensitivity analysis of factors influencing the strength of filling body in high stage stope
WEI Fuhai, WANG Zhongqiang
((Masteel Luohe Mining Co., Ltd., Hefei 231500, China))
摘要
图/表
参考文献
相似文献
本文已被:浏览 67次   下载 65
投稿时间:2020-05-26    修订日期:2020-06-15
中文摘要: 高阶段矿房回采过程中,如何既能减少胶结剂用量又能保证高阶段充填体的稳定性,是采用阶段空场嗣后充填法开采的矿山面临的难题之一。为合理划分采场结构,降低充填成本,针对罗河铁矿高阶段采场充填体稳定性开展研究,研究了各因素交互作用下对充填体强度影响的敏感程度,提出采场宽度、高度、长度与充填体强度之间的合理匹配值。利用BOX-BEHNKEN设计法开展试验,根据设计原理进行4因素4水平设计,计算各种参数情况下,矿山安全生产所需要的胶结充填的抗压强度,再采用Design-expert软件拟合充填体强度需求影响因素与响应量,对响应面回归模型进行方差分析,确定各因素的敏感程度。研究结果表征了充填体强度需求影响因素敏感度顺序为:采场宽度>采场长度>采场高度>内摩擦角,提出了各工艺技术条件下充填体强度需求,对矿山实际生产具有一定指导意义。
中文关键词: 充填体  稳定性  敏感性分析  强度需求
Abstract:In the process of high-stage room mining, how to reduce the amount of cement and ensure the stability of high-stage filling body is one of the problems faced by many mines that adopt the method of open stope and subsequent filling. In order to reasonably divide the stope structure and reduce the filling cost, this paper studies the stability of the filling body in the high stage stope of Luohe iron mine, studies the sensitivity of the interaction of various factors on the strength of the filling body, and puts forward the reasonable matching value between the stope width, height, length and the strength of the filling body. The Box-Behnken design method is used to carry out the experiment. According to the design principle, the four factors and four levels design are carried out. The compressive strength of cemented filling required by the safe production of the mine is calculated under various parameters. Then, the design expert software is used to fit the influencing factors and response quantity of the strength demand of the filling body. The variance analysis is carried out on the response surface regression model to determine the sensitivity of each factor. The results show that the sensitivity order of factors affecting the strength demand of filling body is: stope width > stope length > stope height > internal friction angle. The strength demand of filling body under various technological conditions is put forward, which has certain guiding significance for the actual production of mines.
文章编号:     中图分类号:    文献标志码:
基金项目:
引用文本:
魏福海,王忠强.高阶段采场充填体强度影响因素敏感性分析[J].有色金属(矿山部分),2021,73(2):60-63.
WEI Fuhai,WANG Zhongqiang.Sensitivity analysis of factors influencing the strength of filling body in high stage stope[J].NONFERROUS METALS(Mining Section),2021,73(2):60-63.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299757

杂志信息

期刊简介

相关下载

联系我们

电话:010-63299757

传真:010-63299754

QQ:XXXXXXX

Email:ysks@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地十八区23号楼

关注微信公众号