本文已被:浏览 866次 下载 606次
投稿时间:2020-04-08 修订日期:2020-04-15
投稿时间:2020-04-08 修订日期:2020-04-15
中文摘要: 在地下矿山建设项目可行性研究阶段,确定岩石移动角目前常用的方法是工程类比法。而一些改扩建项目,受条件限制,地表会有受保护的对象落入按照工程类比法确定岩石移动范围内。提供一种采用数值模拟进行安全评价的方法评价岩石移动角选取的合理性,并在案例中进行了应用,对矿岩开采移动界限进行了定性定量评价且提出了相应的安全对策措施建议。
Abstract:In the feasibility study stage of underground mine construction project, the engineering analogy method is commonly used to determine the rock movement angle. However, some reconstruction and expansion projects were restricted by the conditions: some protected objects on the surface may most likely fall into the range of rock movement determined according to the engineering analogy method. In this paper, a method of safety evaluation by numerical simulation was provided to evaluate the rationality of the selection of rock movement angle, and it was applied in a case study. The qualitative and quantitative evaluations of the mining movement limit were carried out, and the corresponding safety countermeasures and suggestions were proposed.
keywords: safety assessment filling mining numerical simulation surface subsidence shaft displacement
文章编号: 中图分类号: 文献标志码:
基金项目:
作者 | 单位 | |
吴永刚* | 北京国信安科技术有限公司 | wuyonggang2010@126.com |
Author Name | Affiliation | |
WU Yonggang | Beijing GXAK Co., Ltd. | wuyonggang2010@126.com |
引用文本:
吴永刚.充填法采矿影响下地表沉降及竖井位移安全评价分析[J].有色金属(矿山部分),2020,72(5):62-66,78.
WU Yonggang.Safety evaluation and analysis of surface subsidence and shaft displacement under the influence of filling mining[J].NONFERROUS METALS(Mining Section),2020,72(5):62-66,78.
吴永刚.充填法采矿影响下地表沉降及竖井位移安全评价分析[J].有色金属(矿山部分),2020,72(5):62-66,78.
WU Yonggang.Safety evaluation and analysis of surface subsidence and shaft displacement under the influence of filling mining[J].NONFERROUS METALS(Mining Section),2020,72(5):62-66,78.