###
有色金属(矿山部分):2019,71(4):47-51
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
安庆铜矿1#矿体深部残矿回采安全性分析
((铜陵有色金属集团股份有限公司安庆铜矿,安徽 安庆 246100))
Safety analysis of deep residual mining in 1# ore body of Anqing Copper Mine
((Anqing Copper Mine, Tongling Nonferrous Metals Group Co., Ltd., Anqing Anhui 246131, China))
摘要
图/表
参考文献
相似文献
本文已被:浏览 183次   下载 0
    
中文摘要: 为了保障安庆铜矿产量的要求,加快矿山深部矿体的开采进度,对1#矿体深部残矿的回采区域进行了工程调查与安全性评估。结合深部采场底部胶结充填体原位取芯,获得了采场充填强度的分布规律,进而提出了残矿回采布置方案。通过FLAC三维数值软件,对-618 m水平以下新规划的采充时序进行模拟分析,从最大主应力云图可知,在残矿采场回采过程中下向揭露的胶结充填体能够保持稳定,表明不留设-618~-640 m水平矿柱的回采方案安全可行。根据数值模拟结果,对残矿回采布置方案进一步优化,实现1#深部残矿安全回采。
Abstract:In order to guarantee the production requirements and speed up the mining progress of the deep ore body in the Anqing copper mine, the engineering investigation and safety evaluation of the deep residual area in 1# ore body were carried out. Combined with the in-situ core of the cemented backfill at the bottom of the deep stope, the distribution law of filling strength of the stope was obtained, and the layout scheme of the residual ore was proposed. Through FLAC three-dimensional numerical software, the mining and filling sequence of the new plan below -618 m level was analyzed. From the maximum principal stress cloud map, the cemented backfill exposed in the mining process of the residual ore could maintain stability, which indicated that the mining scheme without -618~-640 m horizontal pillar was safe and feasible. According to the results of numerical simulation, the mining layout of residual ore was further optimized to achieve safe mining of 1# deep ore.
文章编号:     中图分类号:    文献标志码:
基金项目:
引用文本:
罗皖东.安庆铜矿1#矿体深部残矿回采安全性分析[J].有色金属(矿山部分),2019,71(4):47-51.
LUO Wandong.Safety analysis of deep residual mining in 1# ore body of Anqing Copper Mine[J].NONFERROUS METALS(Mining Section),2019,71(4):47-51.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299757

杂志信息

期刊简介

相关下载

联系我们

电话:010-63299757

传真:010-63299754

QQ:XXXXXXX

Email:ysks@bgrimm.com

邮编:100160

地址:北京市南四环西路188号总部基地十八区23号楼

关注微信公众号