###
有色金属(矿山部分):2024,76(2):155-160,169
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
步进式复扩刀盘及天井钻机的应用研究
颜武刚1,张 浩2,代建龙1,未 崴1,尹千才1,王 锋1,彭 云1
((1.湖南创远高新机械有限责任公司,长沙 410205;2. 新疆哈巴河阿舍勒铜业股份有限公司,阿勒泰 836706))
Research on the Application of Stepping Compound Expanding Cutter Head and Raise Boring Machine
YAN Wugang1, ZHANG Hao2,DAI Jianlong1, WEI Wei1,YIN Qiancai1, WANG Feng1, PENG Yun1
((1.Hunan Chuangyuan High-tech Machinery Co., Ltd., Changsha 410205, China; 2. Xinjiang Habahe Ashele Copper Industry Co., Ltd,Aletai 836706, China))
摘要
图/表
参考文献
相似文献
本文已被:浏览 131次   下载 143
投稿时间:2023-11-30    修订日期:2023-12-10
中文摘要: 随着科技的进步和社会的发展,地下大直径竖向工程的施工需求越来越多,已由传统的地下矿山开采领域延伸到水力发电、公路铁路隧道、人防工程、军事工程、市政工程等各个领域。长期以来,我国地下大直径竖向工程的施工主要以人工、半机械化为主,安全风险高、劳动强度大、工作效率低,如果采用大直径天井钻机施工则由于一次性投入购置成本较高制约了大直径竖向工程施工的机械化。本文详细介绍了步进式复扩刀盘的结构组成、工作原理、施工工艺,分析了液压系统,测试了不同预充氮气压力条件下油缸复位时间,提出了地下矿山复杂条件下远程通信控制系统解决方案,并将该技术应用于矿山实际生产,结果表明步进式复扩刀盘可实现小井径天井钻机施工大井筒,对推动我国地下中小型矿山等领域大直径竖向工程施工的机械化意义重大。
Abstract:With the progress of technology and the development of society, the construction demand for underground large-diameter vertical engineering is increasing. It has extended from the traditional underground mining field to various fields such as hydroelectric power generation, highway and railway tunnels, civil defense engineering, military engineering, municipal engineering, etc. For a long time, the construction of underground large-diameter vertical engineering in China has mainly relied on manual and semi mechanized methods, with high safety risks, high labor intensity, and low work efficiency. If large-diameter Raise Boring Machine are used for construction, the high cost of one-time investment restricts the mechanization of large-diameter vertical engineering construction. This article provides a detailed introduction to the structural composition, working principle, and construction technology of the stepper cutterhead. The hydraulic system is analyzed, and the reset time of the cylinder under different pre filled nitrogen pressure conditions is tested. A remote communication control system solution for complex conditions in underground mines is proposed, and this technology is applied to actual production in mines. The results show that the stepper cutterhead can achieve the construction of large shafts using small Raise Boring Machine, The mechanization of large-diameter vertical engineering construction in China''s underground small and medium-sized mines and other fields is of great significance.
文章编号:     中图分类号:    文献标志码:
基金项目:国家重点研发计划
引用文本:
颜武刚,张 浩,代建龙,未 崴,尹千才,王 锋,彭 云.步进式复扩刀盘及天井钻机的应用研究[J].有色金属(矿山部分),2024,76(2):155-160,169.
YAN Wugang,ZHANG Hao,DAI Jianlong,WEI Wei,YIN Qiancai,WANG Feng,PENG Yun.Research on the Application of Stepping Compound Expanding Cutter Head and Raise Boring Machine[J].NONFERROUS METALS(Mining Section),2024,76(2):155-160,169.

我们一直在努力打
造,精品期刊,传
播学术成果

全国咨询服务热线
86-10-63299757

杂志信息

期刊简介

相关下载

联系我们

电话:010-63299757

传真:010-63299754

QQ:XXXXXXX

Email:ysjsks@sina.com;ysjsks@163.com

邮编:100160

地址:北京市南四环西路188号总部基地十八区23号楼

关注微信公众号